11 Easy Step-by-Step to Change Your Car Tyres

You are driving your car with ease and matching rhythm with your favourite song when suddenly your car starts to feel weird. The driving experience is not as smooth as you earlier feel and the steering wheel jerks. Yup, I know what you think, again costly car repair. But, don’t worry those types of symptoms are generally for car punctures, and it is easy to repair.

In this guide, we will talk about the step-by-step guide on how to change your Continental Tyres Corby by yourself. If you are interested in knowing about changing tyres then keep reading.

Pull Over Your Car in a Safe Place

Ideally, you'll find your flat tyre when your car is safely parked in your driveway or a lot. However, if you're driving, frequent symptoms you have a flat tyre are:

• The car pulls in one way.
• You notice vibrations in your steering wheel.
• You hear a fluttering or thudding sound.

As soon as you see any of the symptoms of a flat tyre, get out of traffic as fast and securely as possible. Driving with a flat tyre is not only unsafe, but it may also cause significant damage to your vehicle's wheel, suspension, braking, and steering systems.

Turn on your hazard lights, take your foot off the accelerator, and pull over, slowly braking and manoeuvring to keep control of the car. If you're on the highway, search for a nearby exit ramp where traffic will go at a slower speed than on the highway itself.

If none of these choices are available, pull into the right shoulder of the road. Look for firm, level terrain on a well-lit straightway where other vehicles can see you. If your car's flat tyre is on the left side, pull off the shoulder far enough to safely manoeuvre on the driver's side without interfering with traffic flow.

Gather Your Tools

Find your car’s manual, usually, they are stored in the glove compartment area. Thoroughly read the section about changing it to know the process for your specific car, which slightly varies for different cars.

Take your spare one, jack and wrench. Most of the time spare tyres have a smaller diameter than standard ones is the reason they are called temporary or doughnut tyres. Place it in a grassy or dirt-covered area so the tyres won’t roll away. If you see oil or residue leak out of the tyre, don’t worry it is completely normal.

To improve fuel efficiency, many contemporary automobiles no longer carry spare tyres. If your car does not have a spare tyre, seek a tyre repair kit and follow the instructions to patch.

Remove the Hubcap and Loosen the Lug Nuts on the Flat Tyre

Set it aside upside down to form a basin for the lug nuts later. Inspect the lug nuts. If you detect one lug nut that is different from the others, your wheels may need to be unlocked using a unique key to avoid theft. Typically, you'll find the key to that lug nut in your glove box or with the spare tyre.

To loosen the lug nuts, spin the wrench a quarter or half-turn anticlockwise. Removing the lug nuts before jacking up your car. The car's weight will keep the wheel steady, preventing you from accidentally shifting the tyre instead of freeing the lug nuts.

After you have loosened the lug nuts, set up the jack and place it under the metal frame next to the tyre you want to replace. Your car’s manual will show you the proper place to do this work and most modern cars even have a notch in the metal frame where the jack should fit.

Otherwise, use a torch to examine beneath the metal frame adjacent to the tyre and feel behind it. The jack must be placed beneath your car's metal frame. If you unintentionally place it where there is plastic, it may fracture and damage your vehicle.

If the ground is soft under the jack, lay a piece of wood beneath it to keep it stable before raising it. Once you've secured the jack and released the lug nuts, lift the vehicle.

Other cars have a pump jack, so you'll slide the handle up and down to activate the hydraulics. After a few revolutions or pumps, pause to double-check that the jack is in the correct location. Lower it and re-adjust if necessary.

Raise your automobile until the tyre is about 6 inches off the ground, allowing you adequate space to work. This can take a few minutes; if you become fatigued, stop and rest. When you're finished, remove the handle or store it underneath the car so you don't accidentally bump it when changing the tyre.

Put the Spare Tyre on the Wheel Stud and Replace the Lug Nuts

Grab the spare tyre with both hands, ensuring that the valve stem (where you inject air into the tyre) faces you. Lift the Cheap Tyres Corby and set them on the wheel hub, carefully spinning them to line the tyre's holes with those on the wheel hub.

Retrieve the lug nuts from where you placed them in the previous step. Add lug nuts and tighten them in a star pattern, starting with the lug nut opposite the one you just tightened rather than the one next to it.